Sunday, September 20, 2009

Product Review: DVD Painting Figures with Dave Revelia

Painting Figures with Dave Revelia

DVD by Scott Mason at

Overview: How to highly detail paint model railroad for a more realistic appearance. Dave uses techniques familiar to war gamers and other miniaturists.

This DVD is awesome and is the favorite of the three I recently purchased from Scotty Mason. Dave Revelia is an excellent modeler and his talent really shows.

This video is an important one. For any modeler railroader who has gone to a model exhibition other than a railroad one, you know why. Our scale people look terrible! Try the figures on a military diorama or a war gamers’ table. We don’t even come close to the quality. Why? We don’t spend the time or money to properly populate the layout. People really make the layout and in fact, people are what the layout is about. Without them there are no reasons for having trains. I’ve laughed at the many depot scenes I’ve witnessed that don’t even have one person standing around. People are important!

But even more important is that a poorly painted figure with flash and bright colors will absolutely kill your 200 hour and $500 dollar structure! Yet people take cheap figures and just glue them willy-nilly on the model all the time. This DVD will let you get the people right for the model and make it add to the scene, not subtract from it.

The fantastic part is that he goes into detail about the pre-painting steps! Dave teaches you about brushes and brush care which most books don’t really address. He covers paints and paint mixing and even pallets. All is very well done and the amateur could take this video and run with it.

One suggestion that I’d like to give the Mason team is that it would be nice at the end of the DVD if you would list all the suppliers and their contact information. I’ve never heard of Valejo or Andrea paints and figure they are from some miniature specialist company. So I’m going to have to search for them.

Another issue that Dave didn’t really cover is how to properly hold the figure for painting. He was doing this at a table with sharp corners. Normally I pad the area as I’ve had my little fingers go numb from pressing my forarms into the table top. Everyone will develop their own way, but it is important that you are comfortable in order to control the brush.

It was hard to see him actually painting the figures. The camera guy did as good as he could I think but it might have helped if there were some diagrams like the eye diagram to show where to put the paint. O scale is very small, so maybe some G scale figures would have been better.

I can’t believe Dave didn’t show us how to paint the fabulous checkered shirt on one the figures working on his boat builder’s diorama. That was a great figure and the shirt was a prize winner! How about DVD part #2?

As to the video itself, it was very professionally made and the sound/video parts were well done. I hate the wrinkled black backdrop in the background. Another feature I don’t enjoy is the intentional blurring as the camera focuses in on a miniature. It is hard on the eyes and I find myself looking away.

Dave, if you do a volume two we’d like to see more examples of painting, maybe women and animals. The use of brighter colors would be nice and we’d especially like to see you paint figures in N and HO scale.

All in all this is a fine video and worth $30.

Scott Perry

Saturday, September 19, 2009

Let There Be Light - Now at Scott's House

We had a hard time getting started tonight. I had a hard time getting started. Suffering from jet lag from a week long trip to California and working 16 hours a day or more kills you. Really, I'm starting to hate doing this on Friday nights. It's the worst night of the week.

Thanks Rick for the really makes the blog!!!

Tonight's fun club is Glue Bob, Steve-bay, Coalfinger Ken, Popsicle Rick and Gator. We started off the evening with Ken assembling the rolling draw units I bought a month ago for scenery materials. Then he and Steve sanded and painted the benchwork with $2 reject paint from Home Depot. It is now a yucky gold color, but that will all be covered up. Its just to seal the wood.

Steve is taking the belt sander and leveling the spackle for a nice, smooth surface.

Bob, Rick and myself attacked the lights. I'm installing five sets of 4-bulb florescent in the room. This should light up everything.

Bob did the wiring, but we had to redo some of what Scott had done previously as the pigtails were not long enough.

Not sure who told Steve he could crawl all over the benchwork, but he was doing so well that we left him alone.

It is hard to take pictures of guys installing lights when there is no light. Where's the flash, Rick?

Ken had the roller and was making quick work of the painting. Inspection of "Coalfinger's" fingers showed no paint at all!

Rollin' rollin' rollin'...

The plugs didn't fit through the conduit so Scott had to take them apart and re-install them.

Bob is good for high level electrical work!

Please don't hit the watermain!

One by one the lights are installed...

Paint continues to flow...all the time the group chatter is brutal and divisive. Even Rick lost his speaking privileges!

We'll like it better when the big lights are in!

Bob rewires the pigtails...

The island is in the way! Time for it to float out to the main room.

Ken gives it a coat of paint while its out there.

It rolled back into place later...just perfectly!

This has become a very handy system for getting some layout out of the way.

Scott fell off the ladder. This time lapse photo shows him about to collide with the concrete. Rick mopped up the floor. Thanks Rick!

Painting was completed over half the layout, which is great! We will need more $2 paint.

Scott tried his hand at wiring. Good thing it wasn't hot like Kevin's wires last week.

The photos ran out here as Rick had to leave, but we were able to get all five banks of lights installed, discussed the backdrop, painted the benchwork and everything else in one evening. Thanks guys! I'll wire up the lights next week.

Rainy Days...

Are good for going shopping! Marie needed some new sanding sponges, which means Harbor Freight! I went looking for this...

But they didn't have it. So I ordered it on line. We'll let you know how it works. You never know with Harbor Freight...sometimes great, sometimes not.

Here is a neat program that Glue Bob sent to me. Its a bridge building software "game" that let's you design a bridge. Could be handy for figuring out if you have the right type of bridge.

My buddy Steve is ready to go for the season. He owns the company Model Train Seller at and sells used collections of trains. He's picky about what he sells, and often has some really great stuff. He's picking up a new collection today so watch for him on ebay at modeltrainseller.

Tuesday, September 15, 2009

Product Review: Painting and Weathering Detail Castings With Dave Revelia

Painting and Weathering Detail Castings With Dave Revelia
DVD by Scott Mason at

Overview: “How to” DVD that covers basic detail component painting and weathering. Most details are primarily O scale, but tips span all scales.

I have to admit I really enjoyed this video. Dave really knows how to apply color and texture, and most of the techniques applied directly to what I’m working on now. His use of paints along with texture powders really does make a model “pop” out into the scene. Dave really goes into the finest detail about painting so anyone that sees this program should be able to follow the simple instructions and get award winning work.

My first thought is that I’d like to have seen more work around preparing the detail part and giving it a base coat. These steps are critical to good work and need to be understood. Likewise, some of his techniques are a bit dated, though they still work very well. Instead of hand painting barrel staves, I use a paint marker to do it which is faster, gives you more control and dries quickly. Many award winning modelers seldom change or develop new techniques, I’ve found.

As to the DVD, the photography work is excellent as is the sound. It is clear and crisp. Photographing such small items is really hard so you will enjoy the close up work. The ugly black wrinkled curtain is back again, and to make it worse Dave has on a black shirt. There is no humor but some light background music makes watching more pleasant.

It would be a stretch to say the DVD is worth $30. I’d say more like $15. It is worth watching and will give you some great ideas, so buy one and sell it to a friend for half off when you watch it a few times.

Product Review: Building Craftsman Structure Kits Volume 2 DVD

Building Craftsman Structure Kits Volume 2
DVD by Scott Mason at

Overview: “How to” DVD that covers basic structure kit assembly techniques. This is a continuation from Volume 1.

Let’s face it. Most model railroad how-to videos are boring. The techniques are important to us, but watching them on TV is like watching paint dry. Volume 2 of Building Crasftsman Structure Kits is no different.

I do like how this video is structured. You can pick a topic and just watch one topic at a time. That makes it a little more palatable. I watch two or three at a time and then turn it off. My guess is that because the techniques are often time consuming and most hosts are a bit on the monotone side because they are trying to concentrate is what leads to the dullness.

This is Scotty Mason’s second video on this topic. I’ve not seen the first because at $30 a pop they aren’t cheap. Are they worth $30? Not to me. $15 seems to be a more reasonable price when you look at what material you are learning. A good Kalmbach book runs around $20, so I’d say that is my high end spend. In this video all you are really learning is what George Sellios is writing in his excellent kit instructions. So my thought is that it is smarter to invest in the kit than a DVD on kit assembly. Member of the NMRA can get copies of kit instructions for a minimal charge at the Kalmbach Library in Chattanooga.

As to the DVD itself, it is fairly well produced. The camera clarity is excellent, as is the sound. I like the music playing while Scott does the detail work, and the large work space makes it easy to see the tools and supplies. Behind the instructor is a wrinkled black backdrop that makes Scotty’s shiny forehead stand out even more. Is it just me or does Scott remind you of George Costanza. Soon he’ll say “it’s not a pick” and I’ll bust out laughing. Close up shots are very well done and in general the photographic work is excellent. My only pet peeve is the blurry shot that leads in to the next technique and has a thin type style saying the topic name. It is very hard on the eyes.

There is no doubt that Scotty is a top model builder. His work is fantastic. I really enjoy watching him work. Most of the techniques are nothing very new and inventive, but for folks that don’t like to ready instructions, this is the perfect substitute. He keeps referring back to Volume 1, so my thought is that if you are interested in this type of program, buy Volume 1 first as most of the good stuff is probably there.

The one technique he used that I loved and had not seen before was the stucco technique. It looked fantastic and was just what I needed for my adobe structures. Other than that, you’d be better off just to by a Fine Scale Miniatures kit and kit it a go. You’ll learn more and its hands on.

Saturday, September 12, 2009

Wheeler's Back In Town

The men of the NCIOG gathered again on Friday like we do every week. This time we were glad to see our friend Glue Bob return from Canada! So we raided his house.

In attendance: Glue Bob, Popsicle Rick, Coalfinger Ken, Packrat Paul, Steve-bay, Concrete Keith and Gator.The first order of business was to check out Bob's homework. His job was to take non-train pictures of his home town in Canada so that we can use them for scenery. He did a great job but I did see a locomotive or two represented.

Gator carefully studies the photos and asks Bob if he wants to model the graffitti on the rocks or not.
Concrete Keith is in from Chicago! Always good to see him. A top notch modeler even if he is scenery-phobic.
The night continued as we shed some light on the subject. The back corner of the layout has been dark and the scenery team (Scott & Rick) have been complaining about not being able to see the colors in the dark. So Bob got some lighting for us.

Keith is a whiz with electricity. He's so good he took off the light without turning of the 120 volts circulating through the copper. Smooth! I stayed in the background with my cell phone ready to call 911.

Bob made a hole and shoved the wire up into the attic.

Scott begs Keith to turn off the power....nothing doing!

Terrified of the ensuing accident, Scott goes over to help Steve who is laying track in the yard. Scott helps by coating the bottoms of the rails with Pliobond and letting them dry.

Steve is quite handy when it comes to track! He's working on straight sections here and then will build in the turnouts.

Ken gets some supplies and helps Steve by staining all the ties from the yard to Swas Junction. They look great when he's done and his fingers are clean!

Paul says Ken missed a spot. This is the last known picture of Paul in existence. The widow Donna says send donations.

Here is Bob's rail jig designed to hold the rails while the Pliobond dries.

Steve works really fast under the bright light with the very hot soldering iron.

Logistics become a problem with seven men in the room and the air conditioning has to run full blast.

Steve heats up a rail to move it into position.

Bob and Keith make quick work of the wiring. Bob shoves it in and Keith is pulling on the other end.

"Hey, what's this? A whistle" ....NO, it's the wire with electricity on it!!!!

Bob moves in to relieve Paul from holding the wire as his arm is turning pail and his face is turing red.

Keith is working the yard on the upper deck. Nice, white shoes!

Scott is drowning in scenery...the guys will paint the backdrop later tonight!

Why is it not working? Oops...ALL the wires have to be connected.

I have a $10 spot saying he falls off the ladder...

What! No paint! Crap! Rick and Scott get in the car and go to Wally Mart. Apple Barrel paints are great for scenery! We buy $7.00 worth.

While Rick and Scott are gone, the rest of the guys paint the backdrop.

One color...that's easy!

Oops....add some white.

We're back with the paints. Rick blends the colors while Scott paints the rock facings. Messiness counts.

A blotch here, a blotch there and then some ink wash to blend them together. Perfect!

Just a light mist...two or three drops of india ink in alcohol.

A picture of Rick doing nothing. Thanks Rick for all these great photos! I'll remember my camera one day!

Bob's list of projects is really getting done tonight!

Check...check...check....we're done!

Here is Rick and Scott's rock work. Not quite right. Bob's photos show more yellow, so we'll let the dry and play with it some more next trip.

Removable scenery is a nifty idea. We may do more with this in the future.

Ken staining the last of the ties.

The trick is not to get it on the floor. Or your shirt. Or your hands. Ken has it down pat.

A rock cut with a little iron ore.

Another area of the rock outcropping. Bob is excited. Me too!

There goes another great night on the railroad!